Numerous factors contribute to gas explosions in both residential and commercial areas. Gas explosions occur when some type of flammable gas, such as methane, natural gas, propane, or butane, leaks, mixes with air, and ignites from a flame or spark. Speak with an experienced gas explosion lawyer from The Doan Law Firm about your case today.
One of the most common causes of gas explosions is a leak in a weak or damaged gas line. This may happen if the line was physically damaged underground or has corroded over time due to age and environmental conditions. Old and rusted lines are more likely to suffer breaks. Both indoor and underground piping can deteriorate like this, allowing the gas to seep into the surrounding ground, air, and structures.
Gas leaks may occur when appliances, heaters, water heaters, or furnaces are not installed properly. Incorrect fittings or sizing can create a leak risk. Over time, fittings can become loose, and seals may break, creating small opportunities for gas leaks to occur. This is common at joints or other connection points.
Most gas-burning systems, from small home devices to large industrial furnaces, require routine maintenance to optimize function and limit exposure risks. Valves may wear out, allowing gas to escape. Faulty propane tank regulators may create unsafe conditions. Malfunctioning internal systems and components that do not get proper inspection can create risks over time. Substandard hoses are another concern.
Inadequate ventilation can allow methane to accumulate, including in underground mines. If the gas reaches an explosive concentration and encounters an ignition source, an explosion can follow. Combustible dust is a separate hazard: in coal mines, a methane explosion can stir up coal dust and trigger additional explosions. Ventilation, monitoring, and dust controls help reduce these risks.
Any type of ignition source can be a concern for gas explosions. The smallest action can cause a risk in the right environment. For example, plugging in a charger in an area where there is gas present can cause a fire. Light switch use, static electricity, or the pilot light on a furnace or stove can also contribute to the explosion. In these situations, gas accumulates in the air and builds up until an ignition event occurs, creating an explosion.
In some cases, work around utility lines, such as digging into the ground by construction, roadwork, or utility companies, can cause damage to the gas line. A strike to an underground gas main can cause an immediate or delayed explosion if leaking gas reaches an ignition source.
These are some of the most common causes of gas explosions, but other factors may also contribute. With the help of a full investigation, it is possible to determine the underlying cause of the event and, from there, determine who is at fault for the explosion. A gas explosion lawyer from The Doan Law Firm can answer your questions. Call today to schedule a free consultation.